Masters theses : Science
Permanent URI for this collectionhttps://repository.neelain.edu.sd/handle/123456789/12103
Browse
5 results
Search Results
Item Determination of the Optical Properties and Density of Biodiesel Produced from Waste Cooking Oil(Al-Neelain University, 2021-08) Sahar Ibrahim Abd-Elrhman AhmedABSTRACT In this research waste cooking oils which have been used in frying purposes. the main aim of this research is to produced biodiesel from waste cooking oil. Methanol and sodium hydroxide (NaOH) were used to prepare five samples of biodiesel from recycling sunflower oil obtain from restaurant in Nile street Omdurman was used. and heated for different times (45,75,105,135 and 165 min). The obtained biodiesel samples were characterized using UV-VIS spectroscopy and FTIR spectroscopy. The results showed that the absorbance of biodiesel samples in ranged (1.042 to 1.007 a.u) at wavelength (327.929 nm) and absorption value for standard sample was (1.004 a.u) at (336.22 nm), Absorption coefficient and extension coefficient have same behavior of absorption, all samples in ultra violet region, Transmission is inverse behavior of absorption so that the sample that have high absorption, should have low transmission. For refractive index, all samples have same value of refractive index (2.152) at wavelength (384.867 nm) this value is greater than the value of stander sample at the same wavelength. the density of biodiesel samples has same value (0.8975 g/cm-3) when stander sample was )0.82 g/cm-3(. The results showed that the properties of prepare biodiesel samples were approximately have same properties of fossil diesel and hence the prepared biodiesel can be used instead of fossil to produce energy and help in environment protection. المستخلص في هذا البحث تم استخدام زيت الطهي الذي استخدم في القلي . و الهدف الرئيسي من هذا البحث هو إنتاج وقود الديزل الحيوي من زيت الطهي المستخدم في القلي ، تم استخدام الميثانول و هيدروكسيد الصوديوم لتحضير خمس عينات من وقود الديزل الحيوي من إعادة تدوير زيت زهرة عباد الشمس المستخدمة التي تم الحصول عليها من من مطعم بشارع النيل بأمدرمان و تم تسخينها لفترات زمنية مختلفة (105،75،45، 135 و 165 دقيقة) . تم معرفة خصائص و تمييز عينات وقود الديزل الحيوي التي تم الحصول عليها بإستخدام التحليل الطيفي للأشعه المرئية و فوق البنفسجية و التحليل الطيفي للأشعه تحت الحمراء . أظهرت النتائج أن إمتصاص عينات الديزل الحيوي تراوحت بين (1.042-1.007 وحدة ذرية) عند الطول الموجي 327.929 نانومتر و قيمة الإمتصاص للعينة القياسيه كانت 1.004 وحده ذرية عند 336.22 نانومتر ، وجد أن معامل الإمتصاص و معامل التوهين لهما نفس سلوك الإمتصاص والطول الموجي لكل العينات يقع في المنطقة فوق البنفسجية ، الإنتقال هو سلوك عكسي للإمتصاص بحيث يكون للعينة ذات الإمتصاص العالي إنتقال منخفض. أما بالنسبة لمعامل الإنكسار فإن جميع العينات لها نفس قيمة معامل الإنكسار 2.152 عند الطول الموجي 384.867 نانومتر ، و هذه القيمة أكبر من قيمة العينة المعيارية عند نفي الطول الموجي.كما أن كثافة كل عينات وقود الديزل الحيوي لها نفس القيمة 0.897 جم.سم-3 بينما كانت العينة القياسية 0.82 جم.سم-3 أظهرت النتائج أن خصائص عينات وقود الديزل المحضره لها نفس خصائص الديزل الأحفوري تقريبا و بالتالي يمكن إستخدام وقود الديزل الحيوي المحضر بدلا من الأحفوري لإنتاج الطاقة و المساعدة في حماية البيئة.Item Studying the Physical Properties of Natural Quartz in Sudan(Al-Neelain University, 2021-08) Alaa Yahia Altayeb MohammedAbstract This study about physical properties of natural quartz in Sudan. The studies were carried out at room temperature by using laser induced break down spectroscopy (LIBS), Fourier transform infrared (FTIR) spectroscopy and Ultra spectroscopy (USB) techniques. According to LIBS analyzed data, the following elements were recorded (CI,Ru I, AmI, KrI, MoI ,RpII,XeI, LuI, TcI) in sample1 , (NiI, PrII, PmI, VI) in sample2, (Xe11, Eu1, In11, ThI, ArII, CeII, NeII) in sample3, (YII,NiII, NeII, XeII, YpII, SII) in sample 4 and (ThI, CrI, MoI, RpII, VI, TcI, NeI, SII, III, CsI, SrI) in sample5 . The chemical bonds of the natural quartz were verified by FTIR spectrometer and found to be centered around (455, 693, 787 ,1086, 1596, 1879 cm-1). Some optical properties such as absorption, reflectivity, absorption coefficient was verified by USB spectrometer, the energy band gap was calculated from USB spectrometer and it was found to be within (2.715~2.725 eV) which means that it belongs to semiconductor. المستخلص هذه الدراسة حول الخصائص الفيزيائية لبلورات الكوارتز الطبيعي في السودان . وقد تم اجراء الدراسات التركيبة في درجة حرارة الغرفة باستخدام تقنيات الانهيار المستحث بالليزر (LIPS) وتحويل فورييه بالاشعة تحت الحمراء (FTIR) والمطياف الضوئي الفائق ( USB) . وفقا لتحليل الانهيار المستحث بالليزر تم تسجيل العناصر الاتية (الكربون 11,روثينوم1,امريسيوم11,الكريبتون1,موليبدنوم1,روبيديوم1,زينون1 ,لوتيشيوم1,تكنيشيوم1 ) في العينة الاولى و(النيكل 1,براسوديميوم11,بروميثيوم1,فانديوم1) في العينة الثانية و( زينون11,يوروبيوم1,الانديوم11,ثوريوم1,ارجون11,سيريوم11,نيون11) في العينة الثالثة و(الاتريوم11,النيكل11,النيون1,الزينون1,الكبريت 11,اتيربيوم11) في العينة الرابعة و( ثوريوم1,كروم11,موليبدنوم1,روبيديوم11,فانديوم1,تكنيشيوم1,نيون1,الكبريت11,اليود11,سيريوم1,سترونشيوم1) في العينة الخامسة. ودرست بعض الخصائص الضوئية للعينات باستخدام المطياف الضوئي الفائق. وتم التحقق من الروابط الكيميائية للمركبات بواسطه مطيافية الاشعه تحت الحمراء، ووجدت انها تتمركز حول ( 455و693 و787و10861596 و1879 سم-1). أيضا تم التحقق من بعض الخواص الضوئية مثل الامتصاصية ، الانعكاسية ، معامل الامتصاص، بواسطة المطياف الضوئى الفائق ) (USB . كما تم حساب فجوة الطاقة ووجد انها في الحدود (2.715~2.725 الكترون فولت ) ، مما يعنى أنها تنتمى لاشباه الموصلات .Item Determination of some heavy metals concentration on selected soils from Albawga village(Al-Neelain University, 2021-02) NohaBabikerAlharith OmerAbstract The objective of this study was to determine the heavy metals in some areas of Albawga village in the River Nile state. The samples were brought from different areas according to the distance between the mining area and the village, the main sample (s1) from mining zone the others samples(s2, s3, s4ands5) from different areas that far about 1, 2, 3 and 4 kilometers away from the mining zone. Samples were analyzed using X-ray florescence (XRF) and Fourier Transform Infrared (FTIR) Spectrometers. The concentrations of heavy metals decreased with increased distance from the mining zone.The mean concentrations in part per million (ppm) are as follows: 86340 for Ca, 13300for Ti, 190000 for Fe, 75.38 for Cu, 445.8 for Hg,817.2 for PB,1874 for Sr,1946and for Zr.The XRF results showed there is heavy metals with high concentrations compared to background values International Atomic Energy Agency (IAEA) and Scottish Environment Protection Agency (SEPA).Also FTIR results determined the functional group which present in the samples. المستخلص هدفت الدراسة لتحديد العناصر الثقيلة في بعض الاماكن في منطقة الباوقة بولاية نهر النيل. أحضرت العينات من مناطق مختلفة.العينة الرئيسة من منطقة التعدين بينما العينات الأخرىمن مناطق مختلفة تبعد 1 كم و2 كم و3كم و4كم عن منطقة التعدين.حللت العينات باستخدام ألاشعة السينية المتفلوره وتحويل فورير للأشعه تحت الحمراءXRF)،(FTIRولوحظ أن تراكيز العناصر الثقيله يتناقص كلما زادت المسافه عن منطقة التعدينوكان متوسط تراكيز العناصر (كجزء من المليون)كما يلي:8630لعنصر الكالسيوم و13300للتيتانيوم و 190000للحديدو75.38للنحاس و445.8للزئبق817.2 للرصاصو1874 للاسترانشيوم و1946 للزركونيوم.وأظهرت النتائج وجود بعض العناصر الثقيلة بتراكيز أعلى من القيم المرجعية حسب وكالة الطاقة الزرية العالمية والوكالة الاسكتلندية لحماية البيئة. كما حددت نتائجطيف الأشعة تحت الحمراء المجموعات الوظيفية الموجوده في العينات.Item Synthesis and Optical Properties of Nix Cu1-x O2 Using Sol-Gel Method.(Al-Neelain University, 2021-04) Faiza Ishag Mohammed AdamAbstract In this study, the nickel copper oxide samples with the chemical formula (Nix Cu1-x O2) (x = 0.1, 0.3, 0.5, 0.7, 0.9) were synthesized using sol- gel method. The study focused on the optical properties of the samples using infrared spectroscopy and ultraviolet light spectroscopy. The chemical bonds of the compounds were verified by an infrared spectroscopy and found to be centered around (430, 511, 772, 1050, 1330, 1420, 2340, 3550, 3760, 3900 cm-1). Also some optical properties such as absorbance, absorption coefficient, reflectivity and extinction coefficient were verified by UV –Vis spectrophotometer. It was found that the values of the absorption coefficient (α) and the extinction coefficient (k) decreased with increasing the molar ratio of (Cu1-x). The energy gap of the samples was also calculated from the UV spectrophotometer data and found that it is in the range of 2.751 to 2.851 electron volts, which means that it belongs to the semiconductor. المستخلص في هذه الدراسة تم تحضير عينات اكسيد نحاس النيكل ذات الصيغة الكيميائية(Nix Cu1-xO2) 0.1 = x)0.3ꓹ0.5ꓹꓹ0.70.9ꓹ) باستخدام طريقة سول-جل وركزت الدراسة على الخواص الضوئية للعينات باستخدام مطياف الأشعة تحت الحمراء والمطياف الضوئي للأشعة فوق البنفسجية. وتم التحقق من الروابط الكيميائية للمركبات بواسطة مطيافية الأشعة تحت الحمراء، ووجدت انها تتمركز حول (3900ꓹ3760ꓹ3550ꓹ2340ꓹ1420ꓹ1330ꓹ1050ꓹ772ꓹ511ꓹ 430 سم1-) . أيضا تم التحقق من بعض الخواص الضوئية مثل الامتصاصية، معامل الامتصاص، الانعكاسية ومعامل الخمود بواسطة المطياف الضوئي للأشعة فوق البنفسجية (UV) ووجدت ان قيم معامل الامتصاص ((α ومعامل الخمود (K) تقل مع زيادة النسبة المولية للنحاس (Cu1-x). كما تم حساب فجوة الطاقة في العينات من بيانات مقياس الطيف الضوئي بالاشعة فوق البنفسجية ووجدت انها في حدود 2.75 إلى 2.851 الكترون فولت، مما يعني انها تنتمي لأشباه الموصلات.Item Synthesis and characterization of Barium Titanium Oxides (BaTiO3) Single perovskite Annealed by Different Temperatures(Al-Neelain University, 2021) Mohammed Alsidiig Abdalgader MohammedABSTRACT In this research, the Solid state interaction method was used to prepare BaTio3 single perovskite sample, which heated for different annealing temperature from at room temperature’25 … 800’…till 1200◦C degrees. The optical properties of the samples were investigated using Fourier Transformation Infrared Spectroscopy (FT-IR) and Ultraviolet visible (UV-Vis) spectroscopy. UV visible results showed that the data of UV-Visible used to evaluate the absorption, transmission, reflection, extension and energy band gap. We found that the effects of annealing temperature samples on the extinction coefficient (k) decreases by increasing temperature, and reflection is directly proportional to the temperature, in this case, the materials turned into a mirror. The increasing of energy band gap (Eg) was related to the increasing in aneeling temperature. This transition is indirected and used for the industerial devices to convert the material from insulaters to semiconductors. Whereas the chemical bonds within atoms were been studied investigated and verified using FTIR data. المستخلص في هذا البحث استخدمت طريقة تفاعل الحالة الصلبة في تحضير مركب اوكسيد باريوم تيتانيوم احادي البيروفسكايت BaTio3 ، سُخِن لدرجات حرارة مختلفة بداية من 25, ...800...,1200) درجة وذلك لدراسة الخصائص الضوئية والروابط الكيميائية. استخدم مطياف الاشعة فوق البنفسجية لدراسة الامتصاصية والانعكاسية والنفاذية ومعامل التوهين وفجوة الطاقة ووجد انه بزيادة درجات الحرارة يقل معامل التوهين وتزيد الانعكاسية مما يدل على تحول المادة إلى مرآه عاكسة بزيادة درجات الحرارة ووجدت انه ايضاً بزيادة درجات الحرارة زادت فجوة الطاقة ويحدث هذا في التحولات غير المباشرة وتستخدم هذه في الاجهزة الصناعية التي تحول المواد من عازلة إلى شبه موصلة. واستخدم ايضا تحويل فورير للاشعة تحت الحمراء لدراسة و تحقيق الروابط الكيميائية للعناصر.