ASSESSMENT OF MIXING CHLORINE WITH CHLORINE DIOXIDE ON BROMATE, CHLORITE, CHLORATE AND THMs LEVELS IN DRINKING WATER IN DISTRIBUTIONS SYSTEMS IN QATAR

dc.contributor.authorElsamoul Hamdnalla Mohamed Hamdnalla
dc.date.accessioned2019-03-12T07:09:21Z
dc.date.available2019-03-12T07:09:21Z
dc.date.issued2018
dc.descriptionA Thesis Submitted in Partial Fulfillment of the Requirements for the PhD Degree in Analytical Chemistryen_US
dc.description.abstractAbstract To meet new WHO regulations, water utilities need to evaluate different disinfectants that will be of broad spectrum against a variety of microorganisms and produce limited amounts of DBPs. Drinking water will be safer, when it is clear from pathogens using disinfectants with minimum organic or inorganic DBPs. Chlorite, chlorate, bromate and trihalomethane's (THMs) are the major DBPs included in WHO guidelines for drinking water quality that need to be monitored and minimized. This study developed and examined novel mixture of disinfectant system by dosing different chlorine concentrations as calcium hypochlorite (Ca(ClO)2) to water containing chlorine dioxide to evaluate the control of water quality in storage and the distribution system in Qatar with emphasis on chlorite, chlorate, bromate, pH and other parameters. Seven water samples were collected from the Ras Laffan-Q Power desalination plant outlet in amber bottles having a chlorine dioxide concentration of 0.3 mg/L in 1 liter. The bottles were spiked with Ca(ClO)2 in sequence to give concentration of 0.2, 0.4, 0.6, 0.8, 1.0, and 1.2 mg/L as free chlorine. The mixtures were stored for 7 days at 25°C in the dark then heated to 45°C for two days more, and analyzed daily for physical and chemical parameters. A total of 312 sub-samples were analyzed for chlorite, chlorate, bromate, bromide, chloride, nitrate, nitrite, sulfate, THMs, temperature, pH, electrical conductivity, and chlorine and chlorine dioxide residuals. Chlorite concentration reductions were observed from the first day forward as 59, 65, 68, 94, 100, and 100%, and 17.4, 22.1, 39.2, 63.9, 66.0, 68.9% (from 0.157 to 0.049 mg/L) respectively based on observed means for seven days the commensurate respective chlorate concentrations increases were 196, 344, 516, 602, 703, 787% (from 0.035 to 0.313 mg/L) based on observed mean values for seven days. These data were statistically analyzed by multivariate regression. There were no significant changes in THMs concentrations and the reductions in chlorite and increases in chlorate concentration are chlorine dosage dependent. No bromate formation was observed. Chlorine dioxide levels decrease as the free chlorine residual levels increased. This study demonstrates that hypochlorite/chlorine dioxide can be used as an operational tool to control the chlorite levels, and slow the disappearance of the chlorine dioxide over time during distribution, that is usually faster than chlorine disappearance. The original chlorine dioxide dosage will determine the ultimate chlorate concentration.en_US
dc.description.sponsorshipHassan Ibrahim Nimiren_US
dc.identifier.urihttp://hdl.handle.net/123456789/14165
dc.language.isoenen_US
dc.publisherNeelain Universityen_US
dc.subjectTHMs LEVELSen_US
dc.titleASSESSMENT OF MIXING CHLORINE WITH CHLORINE DIOXIDE ON BROMATE, CHLORITE, CHLORATE AND THMs LEVELS IN DRINKING WATER IN DISTRIBUTIONS SYSTEMS IN QATARen_US
dc.typeThesisen_US

Files

Original bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
PHD thesis final after defince 1712019.pdf
Size:
2.23 MB
Format:
Adobe Portable Document Format
Description:

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: