Masters theses : Engineering
Permanent URI for this collectionhttps://repository.neelain.edu.sd/handle/123456789/506
Browse
4 results
Search Results
Item Mobile WiMAX Phase Locked Loop Digital Filter Design(Al-Neelain University, 2020-10) MUHANAD YOUSIF IBRAHIM SALIHAbstract WiMAX system is one of the most popular broadband wireless technologies nowadays. It is expected to provide broadband access services to residential and enterprise clients in an economical approach. The most important and significant part in WiMAX system is the phase locked loop (PLL) circuits. PLL directly influence both quality of service (QoS) and the behavior against noise of the WiMAX system, so its optimal design is a main challenge. This research introduced one of the methods for designing PLL including digital low pass filter. The proposed method took in consideration all the mobile WiMAX technology requirements, which are; small settling time, small overshoot and small rise time for the signal. Achieving the PLL optimal design is accomplished by using linear programming matlab code to design the digital low pass filter with appropriate adjustment of certain design parameters. Besides, the digital filter (Finite Impulse Response, Low-pass filter) is simulated via matlab Simulink model represented in fractional frequency synthesizer to achieve all mobile WiMAX requirements which are; small settling time, small overshoot and small rise time. Experiments show the designed PLL and the FIR digital filter improve the transient behavior and meet all mobile WiMAX requirements. Also they show when comparing the proposed PLL design with the state -of -the -art it outperform all of Chou’s, Staggs and Kozak design methods. المستخلص يعد نظام وآيماكس احد اشهر التقنيات اللاسلكية واسعة النطاق في الوقت الحاضر، ومن المتوقع ان تقدم خدمات الوصول الي النطاق العريض للعملاء من المؤسسات والشركات بطريقة إقتصادية. الجزء الاكثر أهمية في نظام الوآيماكس هو دوائر الحلقة المغلقة التى تؤثر بشكل مباشر علي جـــودة الخدمة والسلوك ضد ضوضاء نظام الوآيماكس ، لذا فإن تصميمها الامثل هو التحدي الرئيسي. يناقش هذا البحث تقديم أحد طرق تصميم دوائر الحلقة المغلقة بما في ذلك المرشح الرقـمي المنخفض، حيث أخذت الـطريقة المقترحة في الاعتبار جـميع متطلبات تقنية الوآيماكس ، وهي : وقت تسوية صغير، تجاوز او تخطي بسيط ، ووقت إرتفاع صغير للإشارة اللاسلكية. يتم تحقيق التصميم الامثل لدوائر الحلقة المغلقة باستخدام كود ماتلاب طريقة البرمجة الخطية بغرض تصميم المرشح الرقمي المنخفض مع التعديل المناسب لبعض العوامل المتغيرة في التصميم ، الي جـــانب ذلك تمت محاكاة تصميم المرشح الرقمي المنخفض عبر نموزج محاكاة مولف الترددات في برنامج الماتلاب بغرض تحقيق جميع متطلبات تقنية وآيماكس المتمثلة فى وقت تسوية صغير، تجاوز بسيط ، ووقت إرتفاع صغير للإشارة. تظهر التجــارب أن دوائر الحـلقة المغلقة المصممة والمــرشح الرقـــمي المنخفض يعملان علي تحســين السلوك العابر للاشارة وتلبية جميع متطلبات تقنية الوآيماكس . كما أنها تظهر تفوق هذا التصميم المقترح عند مقارنته مع طرق التصميم السابقة لكل من شوو ، كوزاك ، و ستيج.Item LTE COVERAGE AND CAPACITY FOR AL-AZHARI AREA (south of Khartoum)(2020-10) MALAZ JAMAL ALDEEN EBRAHIM ALIالمستخلص التطور طويل الأمد (LTE) هو تقنية ناشئة ، تم توحيدها بواسطة مشروع شراكة الجيل الثالث. الهدف الرئيسي من LTE هو توفير معدل بيانات مرتفع وزمن وصول منخفض وتقنية وصول لاسلكية محسّنة للحزم تدعم عمليات نشر النطاق الترددي المرنة. تم تصميم بنية شبكة LTE بهدف دعم حركة مرور البيانات باستخدام حزم البيانات مع التنقل السلس وجودة الخدمة الرائعة. في هذا البحث محاكاة لشبكة LTE ، في نطاق 1800 ميجاهرتز على قناة 20 ميجاهرتز ، باستخدام برنامج ATOLL في مدينة الأزهري ، والتي تغطي مساحة تبلغ حوالي 15.65 كم 2. وهي عبارة عن تخطيط تغطية يعتمد على نموذج انتشار COST-231 وتخطيط السعة بناءً على حجم السكان وهيكل التحضر. تشير نتائج المحاكاة إلى أن مدينة الأزهري تتطلب 5 مواقع. Abstract The Long Term Evolution (LTE) is an emerging technology, which is standardized by the Third Generation Partnership Project (3GPP). The main goal of LTE is to provide a high data rate, low latency and packet optimized radio access technology supporting flexible bandwidth deployments. The network architecture of LTE has been designed with the goal to support packet-switched traffic with seamless mobility and great quality of service. In this is a simulation of the LTE network, in the 1800 MHz band on a 20 MHz channel, using ATOLL software in the city of Alazhari, which covers an area of approximately15.65km2. This study, which a coverage planning based on the COST-231 propagation model and the capacity planning based on population size and urbanization structure. The simulation results indicate that the city of Alazhri requires 5 LTE sites.Item Coordinated Multipoint Transmission and Reception in LTE-Advanced(Neelain University, 2019-12) Yousif Ahmed Elsidig ElhadiABSTRACT Coordinated multi-point (CoMP) transmission and reception is a network multiple-input multiple-output (MIMO) technology considered in 3GPP LTE-Advanced systems. In order to improve reliability and capacity of the services for the user equipments (UEs) at the cell edges. CoMP utilizes cooperation among neighboring enhanced node Bs (eNBs). When a mobile station is at the cell edge, it may be able to receive signals from multiple cell sites, and the mobile station’s transmission may also be received at multiple cell sites. If the data transmission and signaling from multiple cell sites can be coordinated, the downlink performance can be significantly improved. This coordination can be similar to the interference avoidance techniques or the case where the same data is transmitted from multiple cell sites. CoMP is very different for the uplink and downlink. DL CoMP is divided into ‘Coordinated Scheduling and Beamforming’ (CS/CB) and ‘Joint Transmission ’(JT) and UL CoMP is divided into ‘Coordinated Scheduling (CS)’ and Joint Reception and Processing (JR)”. The goal of this search is to evaluate the potential performance benefits of JT- CoMP techniques and the implementation aspects including the complexity of the standards support for CoMP, also this project discusses and compare scenarios in which JT-CoMP techniques and without JT-CoMP By using Matlab Program the results are show that data rate, throughput especially cell-edge throughput, spectral efficiency, delay and SNR after coordination have been formed. المستخلص يعتبر تنسيق الشبكات متعددة الارسال والاستقبال من التكنولوجيا متعددة المدخلات والمخرجات وهي من الانظمة المتقدمة للجيل الرابع. لأجل تحسين الموثوقية والخدمات لمعدات المستخدم علي حواف الخلية. الشبكة المنسقة تستخدم لتعزيز التعاون بين الخلايا المتجاورة، وفي حالة ان المستخدم موجود في حافة الخلية قد يكون قادرا علي تلقي اشارات من عدة خلايا في مواقع متعددة ويمكن ايضا ان يرسل المستخدم الي عدة مواقع، اذا كان نقل البيانات والاشارات من خلية المواقع متعددة يمكن تنسيقها، واداء الاستقبال يمكن ان يحسن بشكل كبير. هذا التنسيق يمكن ان يكون مماثل لتقنيات تجنب التداخل او في حالة يتم نقل نفس البيانات من مواقع متعددة الخلايا. لان الاشارة يمكن الحصول عليها من عدة مواقع متعددة الخلايا. التنسيق متعدد النقاط يختلف في عمليات الارسال والاستقبال بالنسبة للمستخدم. في عملية الاستقبال ينقسم الي منسق الجدولة والتشكيل و المعالجة المشتركة اما في عملية الاستقبال ينقسم الي منسق الجدولة والاستقبال المشترك. الهدف من هذا البحث هو تقييم فوائد الأداء المحتملة لتقنيات التنسيق متعدد النقاط وجوانب التنفيذ بما في ذلك تعقيد دعم المعايير لبرنامج التنسيق متعدد النقاط، كما يناقش هذا المشروع ويقارن السيناريوهات التي تستخدمها تقنيات التنسيق متعددة النقاط وبدون استخدام بروتوكول التنسيق متعدد النقاط باستخدام نموذ المحاكاة الماتلاب واظهار النتائج في كل من معدل نقل البيانات، الانتاجية في حافة الخلية، الكفاءة الطيفية، التأخير و نسبة الاشارة الي الضوضاء المستخدمة بعد عميلة التنسيق.Item Performance Evaluation of LTE-Advanced Carrier Aggregation(Neelain University, 2019-12) OMER SEDEEG MOHAMED AHMEDABSTRACT Long Term Evolution-Advanced (LTE-Advanced) provides considerably higher data rates than even early releases of LTE. One key enhancement feature is bandwidth extension by the use of multicarrier technology to support deployment bandwidth up to 100 MHz. In order to achieve up to 1 Gb/s peak data rate in IMT-Advanced mobile systems, carrier aggregation technology is introduced by the 3GPP to support very-high-data rate transmissions over wide frequency bandwidths (e.g., up to 100 MHz) in its new LTE-Advanced standards. The carrier aggregation (CA) technology allows scalable expansion of effective bandwidth provided to a user terminal through simultaneous utilization of radio resources across multiple carriers. The CA in LTE-Advanced is designed to support aggregation of a variety of different arrangements of component carriers (CCs) , including CCs of the same or different bandwidths, contiguous or non- contiguous CCs in the same frequency band, and CCs in different frequency bands. The CA is supported by both formats of LTE, specifically the frequency Division Duplex (FDD) and Time Division Duplex (TDD) variants. Carrier Aggregation (CA) is an essential technology component in LTE-Advanced (LTE-A). CA is capable of combining up to five Long Term Evolution (LTE) carriers to be used for multicarrier transmission in both downlink and uplink. CA provides increased throughputs, additional capacity and possibilities for load balancing. The main objective of this thesis was to study and evaluate the performance of (3CC and 2CC) Inter-band Carrier Aggregation in LTE-Advanced by. . In addition, the focus was on CA Downlink. Compare between system without CA technology and system using CA in the performance like data rate, delay, throughput, spectrum efficiency and SINR. Using a simulation code within MATLAB to test the effectiveness on performance matrices. This thesis suggests that 3CC CA delivers a better mobile broadband experience to the end user by enhancing the peak and average data rates. المستخلص توفر شبكات الجيل الرابع المتقدمة معدلات بيانات اعلي بكثير من شبكات الجيل الرابع. احدي ميزات التحسين الرئيسية هي امتداد النطاق الترددي عن طريق استخدام تقنية تعدد النواقل لدعم عرض النطاق الترددي ليصل الي 100 ميقا هيرتز. من اجل تحقيق معدل بيانات يصل الي 1 قيقا بت/ثانية في الانطمة المتنقلة للاتصالات المتنقلة الدولية المتقدمة؛ تم تقديم تكنولوجيا تجميع الموجات الناقلة توسيع عرض النطاق الترددي للمستخدم من خلال الاستخدام المتزامن للموارد الراديوية عبر موجات ناقلة متعددة . تقنية تجميع الناقل تدعم تجميع عدة نواقل مختلفة سواء كانت في نفس النطاق الترددي )متجاورة او غير متجاورة( او في نطاقات ترددية مختلفةز تقنية تجميع الناقل تدعم التقسيم الترددي المزدوج والتقسيم الزمني المزدوج. يعتبر تجميع الناقل مكونا تقنيا اساسيا في الانظمة المتقدمة للجيل الرابع. تقنية تجمع الناقل قادرة علي جمع اكثر من خمس نواقل للانظمة المتقدمة للجيل الرابع لأستخدامها في الارسال المتعدد في كل من عملية الأرستقبال والأرسال بالنسبة للمستخدم . وايضا يوفر زيادة في الأنتاجية وسعة أضافية وأمكانيات لموازنة الحمل. الهدف الرئيسي من هذه الاطروحة هو دراسة تقييم اداء تجميع الناقل في نطاقات ترددية مختلفة عن طريق تجميع ناقلين وثلاثة نواقل في الانظمة المتقدمة للجيل الرابع. بالأضافة الي ذلك كان التركيز في عملية الاستقبال بالنسبة للمستخدم. تم عمل مقارنة بين نظام لايستخدم تقنية تجميع الناقل ونظام اخر يستخدم تقنية تجميع الناقل في كل من معدل البيانات ، التأخير ، الأنتاجية ، كفاءة الطيف ونسبة الأشارة الي الضوضاء بأستخدام كود المحاكاة داخل برنامج الماتلاب لأختبار فعالية الداء. تشير هذه الاطروحة الي ان تجميع ثلاثة نواقل توفر تجربة افضل للنطاق العريض للمستخدم النهائي عن طريق تحسين متوسط معدلات نقل البيانات.