Masters theses : Engineering
Permanent URI for this collectionhttps://repository.neelain.edu.sd/handle/123456789/506
Browse
Item A thesis Submitted in partial fulfillment of the requirements for the degree of M. Sc in Agricultural Engineering(Al Neelain University, 2011) Abd Elbagy Mohamed HerekaThis research had been conducted at mechanized rainfed agriculture sector, Gedarif State (SUDAN), in the period (2007 – 2008) for two consecutive seasons. The objective of this research aimed to study the effect of different tillage treatments on the productivity of Dura. The experiment has been set in the complete randomized block design with four treatments applied, with four replicates. The treatments represented by chisel plough, disc harrow, wide-level disc and zero tillage .The study included effect of different tillage treatments on dura production components: plant height, number of tillers and productivity, also the research included determination of power requirement of the implements studied at different depth. 7 The study showed that the average field capacity was 24.75%, the average bulk density was 1.28 g/cm³, the infiltration rate in the first five minutes was 210 mm/h and the basic infiltration rate was 13.2mm/h in the first season. In the second season the initial infiltration rate 192 mm/h where as the basic infiltration rate was 12 mm/h . The disc harrow treatment registered the highest readings for plant length 97.75 cm, 90.2 cm for the two season respectively, where as zero tillage treatment gave the lowest reading for the plant length 86cm in the first season, while the chisel plough treatment recorded the lowest readings in the second season .The wide-level disc treatment reading 90.75 cm, 86.5 in the two season consecutively. The chisel plough treatment recorded a high number of tillers (1.75- 2) in the two season, wide-level disc gave the lowest number of tiller (1.25). Determination of power requirements for the implements studied recorded that: Power requirements needed for chisel plough was 17.21kw at depth 22cm, where as the wide-level disc implement needed 11.66kw power requirement at depth 8 cm .and the disc harrow implement at 10 cm depth needed power requirements equal 9.99kw . تم تنفيذ تجربه حقليه خلال موسمين متتاليين 7002 و 7002 في التربة اليينية المتقةقق لقيةا ألزراعه الميري الاليه ولاي القضارف )السودان( بهدف تقييم اثر طرق الحراثه على إنتاجية ألةذر الرفيع . تم تصميم التجرب باستخدام القياعات العقوائي الكامل . أربعه معاملات بار بعةه تكةرارات . المعةةاملات تقةةمم المحةةراا الحفةةار ا المقةة القراةةي ا المحةةراا القراةةي العةةري والحراثةةه الصفري . شملت الدراسة تةيثير أنةوا الحراثةه علةي معةدل التسةربانمو نرةات الةدرط مةن حية طةول النرات عدد الخلف و الانتاجيه. كما شملت الدراس حساب احتياجات قدرط السحب للمحارية تحةت – الدراس لمختلف الأعماق. أوضحت الدراس أن متوس السعه الحقلية 24.75 ومتوسة الكاافة الهايرية 1.28g/cm³ ومعدل تسرب ابتدائي في الخمس دقائق الأولي 210 mm/h ومعدل التسرب القاعدي 13.2 mm/h في الموسم الأول وفي ألسنه الااني كان معدل التسةرب فةي الخمةس دقةائق الأولةي 192 mm/h بينمةا معدل التسرب القاعدي .12 mm/h سجلت معامل المق القراي اعلي قيمه ليةول النرةات ) (97.75, 90.25cm للموسةمين علةي التوالي بينما سجلت الزراع الصفري متوسة ادنةي قيمةه ليةول النرةات 86cm) ( فةي الموسةم الأول في حين سجم المحراا الحفار ادني متوس قرأ ليول النرةات (72cm) فةي الموسةم الاةاني. سةجلت 5 معامل المحراا القراي العري متوس طول ) (90.75, 86.5cm في الموسةمين الأول و الاةاني علي التوالي. معاملة المحةراا الحفةار أعيةت اعلةي متوسة للخلةف ) (2, 1.75 للموسةمين علةي التةوالي بينمةا سةةجلت معاملةة المحةةراا القراةةي العةةري ) 1.25 ( ادنةةي نسةةره فةةي الموسةةم الأول والاةةاني علةةي التوالي. عند حساب احتياجات قدرط السحب سجلت معامل المحراا الحفار 17.21kw عند عمق 77 سم بينما احتياجةات ألقةدر للمحةراا القراةي العةري عنةد عمةق 8 سةم كانةت 11.66kw احتياجةات قةدرط السحب لآل المق القراي عند عمق 10cm سجلت 9.99kw