Sarah Mohammad Khair Ahmed2017-11-072017-11-072017-11-072017-11-072015-07http://hdl.handle.net/123456789/7517Abstract In this research , the basic objective was to examine the presence of specifically three heavy metals which are Cadmium Cd, lead Pb , and Mercury Hg, in some samples of traditional cookery tools locally produced at Almantiqa alsina3ia "Industrial Region " Omdurman , Sudan , It was proposed that certain amounts of Lead is probably being added to the raw material that is based on Aluminum in order to decrease its melting point , or that the raw material was exposed to certain pollutants including some heavy metals due to this standards lacking working environment . The determination was accomplished using the atomic absorption spectrometry. Three raw material samples based on Aluminum , A,B and C were prepared by being collected from various sources . The test samples were prepared by drilling to obtain small fine turnings, and then dissolved in concentrated Hydrochloric acid , impurities were filtered out before sample solutions were quantitively transferred into 250ml volumetric flasks .at that point , samples were ready to be examined with atomic absorption spectrophotometer. G.B.C Savanta A.A.S . the results showed a high amount of lead for sample A, (28ppm) while only (0.040ppm) for Cadmium .For sample B lead was determined to be (12.66 ppm) while Cadmium was (0.013 ppm) . sample C was determined to contain (1.942ppm) of lead . whereas , no Cadmium was at all detected . (IV) Abstract "Arabic" هذه الدراسة , هدفتُ بشكل أساسي الى اختبار وجود اثنين من المعادن الثقيلة وهي الرصاص والكادميوم في عينات من خام الألمونيم الذي يستخدم في صناعة بعض قدور وأدوات الطبخ التي يتم تصنيعها محلياً في "المنطقة الصناعية" بمدينة امدرمان. حيثُ كان من المُرجح أن الرصاص تحديدا ًيضُاف الى الخام عن عمد بغرض تقليل درجة الانصهار أو أن الخام قد تلوث بنسب معتبرة من الرصاص وغيره من العناصر نسبة لانعدام المعايير في بيئة العمل .تم تحضير ثلاث عينات للخام المكون بشكل اساسي من الألمونيم أ , ب , ج . وذلك بجمع الخامات من مناطق مختلقة, ومن ثم خرطها او سحنها لشرائح ناعمة, ثم معالجتها معمليا حيث اذيبت في حمض الهيدروكلويك المركز, ثم تم ترشيح المحاليل من الشوائب ونُقلت الى دورق حجمي بسعة 250 مل واكمل الحجم بالماء المقطر . تم اخضاع العينات الى مطياف الامتصاص الذري. واظهرت النتائج وجود الرصاص بمقدار (28 جزء في المليون) للعينة أ . بينما الكادميوم (0,04 جزء من المليون) لنفس العينة . بالنسبة للعينة ب فقد كُشف عن وجود اقل للرصاص بنسبة (12,66جزء من المليون) .كما كُشف عن وجود الكادميوم بمقدار (0,013جزء من المليون) . اما بالنسبة للعينة ج فقد قٌدر الرصاص فيها بمقدار (1,942جزء من المليون) . في حين لم يتم اثبات أي وجود للكـادميو م في العينة .ChemistryDetermination of Some Heavy Metals In Locally produced Cookery Pots