Optimization of Gold Extraction from Ariab VMS Deposits in the Red Sea Hills, Sudan

dc.contributor.authorMutassim Awad Mohamed Bakhit
dc.date.accessioned2019-03-20T10:57:54Z
dc.date.available2019-03-20T10:57:54Z
dc.date.issued2018
dc.description.abstractAbstract The Hassaï Cu-Au Volcanogenic Massive Sulphide (VMS) deposits located in the Red Sea Hills were discovered early 1980 by the geologists of the joint venture between Geological and Mineral Resources Department (GMRD) and the French (BRGM). These deposits are belonging to the Neoproterozoic and classified as Siliciclastic type. Two main deposits, Hadal Awatib (HADE) and Hassai (HASS) are potential for Copper, Zinc and Gold extraction. The ore dominant mineralogical assemblage is pyrite, with accessory chalcopyrite and sphalerite. Sequential flotation technique to float Copper first , followed by Zinc Copper and Zinc concentrate in flotation circuit yield a recovery of 82-85% and 65-70% respectively. During Copper rougher flotation, several depressors were used to depress Zinc while floating Copper. The considerable amount of gold (130 tons) in these deposits, made it very necessary to optimize its recovery although as byproduct. Therefore special collectors as Dithiophosphate (F2044) and Monothiophosphate (F2644) were tested. Gold recovery of 35 to 40% and 5 to 10% were obtained within Cu and Zn concentrates. The remaining gold report to flotation tailings, which can be cyanide leached directly to recover 47% of the gold without further preparation. However further preparation as ultrafine grinding or roasting resulted in 57% and 79% recovery of the remaining gold respectively. Variability tests showed that when supergene materials increased in the ore the Zinc recovery and grades are suffering and only Copper and gold can be recovered without complications. ملخص منطقة الدراسه التي تقع في البحر الأحمر داخل مربع شركة ارياب للتعدين تحتوي علي عدة مناطق لتمعدن النحاس المصحوب بالزنك والذهب وقد تم اختيار موقعين هما هدل اواتيب وهساي لأجراء دراسة كيفية استخلاص معادن النحاس والزنك والذهب بواسطة تقنية التعويم يليه تذويب المتبقي من الذهب بواسطة محلول السيانيد وذلك نظرا لأنهما يحتويان علي 1.5 مليون طن من النحاس و0.7 مليون طن من الزنك بالأضافه الي 136 طن من الذهب. تعتمد الدراسه علي كيفية تركيز النحاس والزنك بطريقة التعويم علي مرحلتين حيث يطفو النحاس اولا ثم الزنك ثانيا ويكون مصاحبا لهما كميات من الذهب . اثبتت الدراسه انه يمكن استخلاص النحاس والزنك بنسب 82 الي 85% و 65 الي 70% علي التوالي وبدرجة نقاوه تصل الي 29% نحاس و اكثر من 49% زنك. اما بالنسبه للذهب فيستخلص بنسبة تتراوح بين 35 و 40% مع النحاس و نسبه بين 5 الي 10% مع الزنك. ما تبقي من الذهب و الذي يوجد داخل بلورات البايرايت يمكن استخلاص جزء منه بواسطة التذويب بالسيانيد مباشرة بالطرق التقليديه وهي لا يمكن ان تستخلص اكثر من 47% الا انه وبقليل من المعالجات مثل الطحن لدرجه فوق النعومه اوالتحميص يمكن ان يستخلص 57% و 79% علي التوالي من الذهب المتبقي بعد التعويم. ولكن هذه المعالجات تحتاج الي دراسة اقتصاديه لتحديد ما اذا كانت مجديه ام لا اذ ان التكلفه متوقع ان تكون عاليه مقارنة بدرجة تركيز الذهب بهذه الخامات.en_US
dc.description.sponsorshipBadr El Din Khalil Ahmed Khalilen_US
dc.identifier.urihttp://hdl.handle.net/123456789/14242
dc.language.isoenen_US
dc.publisherNeelain Universityen_US
dc.subjectGold Extractionen_US
dc.titleOptimization of Gold Extraction from Ariab VMS Deposits in the Red Sea Hills, Sudanen_US
dc.typeThesisen_US

Files

Original bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
MSC Report final for print.pdf
Size:
4.1 MB
Format:
Adobe Portable Document Format
Description:

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description: